Your new engagement ring is one of the most important investments you will make as well as reflects your style and personality and the last thing you want is for your center stone to fall out.
But sometimes your diamond jewelry in Fayetteville, NC, can be poorly made, you may accidentally hit it at the side of the table, or due to daily wear and tear and poor maintenance, your prongs can come loose causing your gemstone to fall out. Here’s what to do in such cases.
Checking your center stone
If your setting is a solitaire or a six or a four-prong take the edge of your finger and try to move your center stone gently back and forth. If your stone moves then it’s most likely loose. However, if it cannot move then it’s secure.
Now with protective settings like a bezel or a channel you can take a pin and gently press the outer point of your gemstone and try to move it up and down, never exert too much pressure or force as your stone can come loose. You can even take the ring and hold it up to your ear and try shaking it a little and see if it rattles.
If the stone does rattle or is loose, immediately store it safely so that you can take it to a jewelry store in Fayetteville, NC to get repaired.
Examining your side stones
When it comes to side stones, you need to be careful as there is less metal holding up your smaller gemstones. While you can gently shake them, it’s always better to take your ring every couple of months to a jewelry repair in Fayetteville, NC so that they can repair, clean, and maintain your piece as well as tighten your setting.
Wrapping Up
Keep in mind to always grab the band when you’re taking off and putting on your ring and avoid touching the gemstone or setting at all costs.
